Author photo

By AZBW 

Water Spot Protection

Water Spot Protection Easy As Spraying A Hose

 

November 1, 2023

Many boat maintenance tasks are put off due to the time and energy needed to complete them. This isn't the case with new Hydrophobic Spray & Rinse from Glidecoat. Attached to a garden hose, it's fast and easy to create a durable, glossy coating that beads water to protect against spotting for up to three months.

Hydrophobic Spray & Rinse works on virtually all solid marine surfaces including paint, gelcoat, vinyl, glass and metal. Perfect for ongoing Glidecoat Ceramic Coating maintenance, it's equally effective on untreated areas as well. Because buffing and rubbing aren't required, it's simple to protect isinglass and similar clear flexible sheeting.

Using Glidecoat Hydrophobic Spray & Rinse couldn't be easier. After washing surfaces with soap and thoroughly rinsing, the included sprayer head attaches to a garden hose. The integrated knob is turned to the spray position and an area no larger than 10' x 10' is fully saturated. After 30 seconds, the knob is turned to the water setting and the section rinsed. It instantly becomes hydrophobic; multiple layers of the product can be applied for added protection. Once the boat is treated and before it dries, it's wiped with a clean microfiber towel to ensure a streak-free finish. A 32 oz. container of Glidecoat Hydrophobic Spray & Rinse covers 400–500 sq. ft.-enough for a 24'–26' boat-and costs $34.95; 1 gal. is $119.95 and treats 1,600–2,000 sq. ft.

Contact local dealers or Glidecoat, 7812 SW Jack James Dr., Stuart, FL 34997. 561-290-0165. info@glidecoat.com; http://www.glidecoat.com.

 

Reader Comments(0)

 
 

Powered by ROAR Online Publication Software from Lions Light Corporation
© Copyright 2024

Rendered 05/19/2024 19:51